AMAX190血凝仪试剂与测试项目设置.docVIP

AMAX-190 血凝仪试剂与测试项目设置 Reagents / Tests Setup Procedures: (Here we take example for prepare PT, APTT and Fibrinogen) 1. Reagent setup 2. Reagent layout 3. Tests 4. Test group 5. Reconstitute the reagents and buffers 6. Calibrate FIB-O and FIB-M 1. Reagent setup: Setup reagent for item 1-6 as below with the following procedure. a. System b. Password c. Reagent Select on a blank line in the ‘Reagent list’. (Create reagent) d. Enter the following information in the ‘Reagent definition’ menu ? Reagent name (Same as printed on bottle) ? Manufacturer - Sigma Diagnostics ? Lot # - see bottle ? Expiration date - see bottle ? Dispense speed - see application * ? Wash ? Cleaner ? Intra-Clean ? Min volume ? Max volume e. Press ‘ESC’ to main menu REAGENT DEFINITION 1. Thromboplastin or ThromboMAX Name PT Manufact. Sigma Lot. No. Reagent lot number Expiration Lot number expiration date Disp. Speed 0 Wash Cycles 4 Cleaner No Intra-Clean No Min volume (ml) 1400 Max volume (ml) 10000 2. APTT Reagent Name APTT Manufact. Sigma Lot. No. Reagent lot number Expiration Lot number expiration date Disp. Speed 0 Wash Cycles 4 Cleaner No Intra-Clean No Min. Volume (mL) 700 Max. Volume (mL) 10000 3. CaCl2 Name CaCl2 Manufact. Sigma Lot. No. Reagent lot number Expiration Lot number expiration date Disp. Speed 0 Wash Cycles 2 Cleaner No Intra-Clean No Min. Volume (mL) 500 Max. Volume (mL)10000 4. Imidazole, Buffer Name Imidazo