技术规格书BH系列热保护器-PP-HTRIM-POT.PDF

ALLCONNE INTERNATIONAL CO.,LIMITED. 技术规格书 Technical Specification BH 系列热保护器 BH Series Thermal Protector ADD:612614,Fuchen Commercial Bldg NO.2,Tongjian Road NO.177 High-new Technology Zone, ChangZhou, China International Tel: +86-519FAX: +86-519Website: ALLCONNE INTERNATIONAL CO.,LIMITED. 1 用途 Application BH 系列热保护器是一种过热、过载保护装置，主要适用于交流 50Hz、电压 220V 的单相电机由 于过载、堵 转等非正常工作状态而引起的热过载保护，也可用作电热器具、荧光灯整流器、变压器、 集成电路等一般电 气设备的过热保护和温度控制。 BH series thermal protectors are devices for protecting against overload and over temperature. They are usually used for AC 220v /50Hz one phase motors to protect motor from over temperature caused by unusual state such as overload, blocked up. They are also used for protecting against over temperature temperature control in heater, fluorescent ballast, IC etc. 2 结构特点 Characters BH 系列热保护器是采用一定几何形状的双金属片，无需辅助机构，仅靠双金属片的自身感温和 电流热效应， 使双金属元件的状态发生快速变化，直接带动触点实现自动切断和接通电路，起到过 热、过载保护作用， 解决了电流突增，感温滞后的问题。具有内阻小、体积小、密封牢固、比通常保护器更安全更灵敏等优点。 The bimetal with its own small geometrical form is one of the most important parts. There are no other assistant parts in BH series thermal protector. The bimetal is also sensitive to temperature and current, if it is be place in circuitry in series. When it is reach the acting temperature in circuitry, the bimetal will rapidly act then cutting off or connecting the circle. 3 产品分类、型号及外形结构：Type Configuration 3.1 产品分类及型号 Type BH －X X X － XXX 额定动作温度：规格详见附表 Rated Open Temp : the specification refers to additional table