Suspension-汽车构造.ppt

Suspension Function of Suspension system Front Wheel Alignment Types of Suspension Springs Shock absorber Types of Suspension system Wheel Review ６: List the main functions of tire Absorb shocks resulting from irregularities in the road. 吸收来自不规则路面的振动． Provide frictional contact between the wheels and the road so that good traction is secured. This permits the transmitting of power through the tires to the road for rapid accelerating, combats the tendency of the car to skid on turns and allows quick stops when the brakes are applied. 提供车轮与路面之间摩擦接触，保证汽车稳定行驶．这可使汽车突然加速时传递驱动力，在汽车转弯时避免打滑，刹车时快速停车． * * * stabilizer bar coil spring trailing control shock absorber tie rod Review 1: What’s the function of Suspension system? Flexibly connect the wheels to the body Deliver the power and moment from the road to the body Damp out the spring oscillations quickly Review 1: What’s the function of Suspension system? The suspension covers the arrangement used to connect the wheels to the body.The purpose is to prevent large shocks, caused by the wheels striking bumps in the road, being passed to the vehicle occupants and components; otherwise discomfort and damage would occur. 悬架是车架（车身）与车桥（车轮）之间一切连接传力装置的总称。其目的是防止车轮遇到路面不平产生的巨大冲击传给车内的货物和乘客；否则会产生不舒适的感觉和货物的损坏。 The suspension system has two subsystems－the front suspension and the rear suspension. The front suspension is more complicated than the rear suspension. This is because the front wheels must move in several different directions. The wheels must move up and down with the suspension and turn left to right with the steering. Since the car goes in the direction in which the front wheels point, the alignment of the front wheels is important. 悬架系统有两个子系统－前悬架和后悬架．前悬架比后悬架复杂．这是因为前轮需要在不同方向运动．车轮必须随悬架上下运动并随转向系统左右转动．因为汽车在前轮指向的方向上行驶，所以前轮定位很重要． Poor alignment can make a car pull to one side and stop the front wheels from returning to the straight-ahead position after a turn. 不正确的车轮定位参数会使汽车产生偏驶，阻止车轮在转向后回到直线行驶位置。 Review 2: What’s t