基于SystemView的WCDMA系统仿真论文推荐.docVIP

PAGE 摘 要 WCDMA（宽带码分多址）是一种无线通信技术，是中国联通目前采用的3G通讯标准，作为3G的主流标准，WCDMA技术已逐步走向成熟。WCDMA系统引入了多种类型的数据业务，使整个网络业务特性的复杂程度大大超越了以语音业务为主、以少量低速数据业务为辅的传统2G无线网络。采用仿真工具合理的仿真WCDMA系统对WCDMA网络的规划和优化具有重要的指导 本文首先介绍了WCDMA的基本概念，发展现状和基本技术特点，其中着重介绍了WCDMA的主要参数、信道特征及扩频与调制。其次介绍了System View仿真平台的功能与使用简介。最后主要在System View系统软件平台上分别从电路交换承载业务DTCH上行链路编码过程、基带频分双工宽带CDMA上行链路及导频符号相干检测过程三个方向仿真了WCDMA系统，着重于参数设置，电路设计，仿真运行，得出相应的仿真结果，验证WCDMA的可实行性，System View平台的仿真精密性及功能完整性。 关键词：WCDMA; System View；系统仿真 Abstract WCDMA (Wideband Code Division Multiple Access) is a wireless communication technology, China Unicom is currently used in 3G communication standards, as the mainstream 3G standards, WCDMA technology has gradually matured. WCDMA system, the introduction of various types of data services, the complexity of the characteristics of the entire network business far beyond voice services, a small amount of low-speed data services, supplemented by a traditional 2G wireless network. Reasonable simulation tools Simulation WCDMA WCDMA network planning and optimization has an important role in guiding. This paper first introduces the WCDMA, the basic concept, development status and the basic technical characteristics, which highlights the main parameters of the WCDMA channel characteristics, and spread spectrum modulation. Second, it describes the function and use of profiles of the System View simulation platform. The last major system software platform in the System View from circuit-switched bearer service DTCH uplink encoding process, the base-band frequency division duplex wideband CDMA uplink and pilot symbols in coherent detection process in three directions simulated WCDMA system, focusing on parameter settings, circuit design, simulation run, draw the corresponding simulation results, validation of WCDMA can be implemented, the simulation precision and functional integrity of the System View platform.Key words: WCDMA; the System View; system simulation  目 录 TOC \o 1-3 \h \z HYPERLINK \l _Toc170219423 前