FISHER 调压阀 1190.pdf

Instruction Manual Type 1190 Form 5307 04/99 Type 1190 Low Pressure Gas Blanketing Regulator Introduction Scope of Manual This manual provides installation, startup, and mainte- nance instructions and a parts list for the Type 1190 low pressure gas blanketing regulator (figure 1) com- plete with Type Y191A pilot and Type 95H supply pressure regulator. Product Description The Type 1190 low pressure gas blanketing regulator is a pilot-operated, pressure reducing regulator with a supply pressure regulator. This regulator is used for extremely accurate pressure control on very low pressure gas blanketing systems. This regulator helps to control emissions and provides protection against any contamination from atmospheric conditions by providing a flushing action. The Type 1190 gas blanketing regulator maintains a W7428 positive vessel pressure thereby reducing the possibil- ity of vessel wall collapse during pumpout operations. Figure 1. Type 1190 Low Pressure Gas Blanketing Regulator Specifications as it originally comes from the factory are stamped on Ratings and specifications for the Type 1190 gas nameplates located on the actuator and main valve blanketing regulator are listed in the Specifications body, while the pilot outlet pressure range appears on section on page 2. Specifications for a given regulator the pilot spring case closing cap. 2 1