寸产品规格书.doc

志凌伟业 Touch Panel Product Specification Customer Product Name: CMI Product Name: Version: 01 Issued Date: 2011/10/19 Revision History Ver. Reason For Change Date Page Changed Items Description 1 First release 2011/10/19 All All Copy To : Copy ( Cover Sheet ) : Approved By / Reviewed By / Prepared By / Product Specification Drawing 1.2 Touch Panel Configuration Item 項目 Specification 規格 Cover Glass (L)175.8 x (W) 115.8 x0.7mm OCA (L) 161.4 × (W) 97.3 x 0.25mm Sensor Glass (L) 162 × (W) 99.2x x0.55mm Total 1.5mm 1.3 Pin Assignment (From left to right side) Cosmetic Inspection 2.1 Inspection Specification Item 檢驗項目規格裂痕/破裂邊緣毛刺(指印),水霧,陰影, 不可有 OK 目檢 崩邊 不傷及金屬線路或者mark, 不計 不傷及金屬線路或者mark, 不計 ,殘膠,凹痕,刺傷, 金屬殘留,ITO破洞 D0.2mm,不計 间距=20mm且金属残留不可跨线 OK 目檢/比對片 D0.3mm,N ≦5间距(Distance)≧50mm.且金属残留不可跨线 OK 目檢/比對片 0.3mm≦D≦0.4mm,N≦3间距(Distance)≧100mm且金属残留不可跨线 OK 目檢/比對片 D0.4mm,不可有 且金属残留不可跨线 OK 目檢/比對片 可視區刮傷 W≦0.03mm, 不計*1,*2) 间距=10mm OK 目檢 0.03mmW≦0.05mm且L≦5mm 不計*1,*2) 间距(Distance)≧15mm OK 目檢 0.03mmW≦0.05mm且5mmL≦15mm, N=3 间距(Distance)≧15mm (Remark:*1) OK 目檢 0.05mmW≦0.1mm且L3mm N≦3,间距(Distance)≧50mm OK 目檢 W0.1mm, 不可有除5*5區外, 其餘不計5*5區刮傷,髒污,異物不可有除5*5區外, 其餘不計mura 依照限樣(只計深淺程度) OK 目檢0.15mm內允收 OK 目檢/比對片 切割不良 與輪廓線落差在0.15mm內允收 OK 目檢/比對片 線路刮傷除5*5區外, 其餘不計 目檢/比對片 2.2 Inspection Environment Conditions 4.2.1 照度 Illumination： 1000±200lux 4.2.2 溫度 Temperature： 20-26°C4.2.3 濕度 Humidity： 50-60%RH 4.2.4 檢驗視距 Inspection distance：30±5cm 4.2.5 檢驗視角 Inspection viewpoint：Up/Down±45°；Left/Right±45° 4.2.6 無塵室等級 Clean Room Class：千級 Class 10,00 Reliability Test Reference number Name of Requirement Test Define Sample Amounts Test Time(days) 1 Temperature Related Requirements 1.1 High Temperature Storage 80±2℃/240hrs 5 11 1.2 Low Temperature Storage -30±2℃/240hrs,＜15%RH 5 11 1.3 High Temperature Operation 70℃/240hrs 5 11