官方说明书intersil EL7457 说明书.pdf

EL7457 ® Data Sheet January 3, 2005 FN7288.3 40MHz Non-Inverting Quad CMOS Driver Features The EL7457 is a high speed, non-inverting, quad CMOS • Clocking speeds up to 40MHz driver. It is capable of running at clock rates up to 40MHz • 4 channels and features 2A peak drive capability and a nominal on- resistance of just 3Ω. The EL7457 is ideal for driving highly • 12ns t /t at 1000pF C R F LOAD capacitive loads, such as storage and vertical clocks in CCD • 1ns rise and fall time match applications. It is also well suited to ATE pin driving, level- shifting, and clock-driving applications. • 1.5ns prop delay match The EL7457 is capable of running from single or dual power • Low quiescent current - 1mA supplies while using ground referenced inputs. Each output • Fast output enable function - 12ns can be switched to either the high (V ) or low (V ) supply H L • Wide output voltage range pins, depending on the related input pin. The inputs are compatible with both 3V and 5V CMOS and TTL logic. The • 8V ≥ VL ≥ -5V output enable (OE) pin can be used to put the outputs into a • -2V ≤ VH ≤ 16.5V high-impedance state. This is especially useful in CCD application