官方说明书ST UM0121 USER MANUAL 数据手册.pdfVIP

ST UM0121 USER MANUAL handbook /file/2588817 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2588817 UM0121 USER MANUAL ControlBD-7FMC2 Reference Design Graphical User Interface (GUI) INTRODUCTION The Reference Design Kit Graphical User Interface (RDK-GUI) provides an easy way to configure motor control system parameters. These parameters are related to the user’s motor type and model. The param- eters which can be configured include the following: ■ type of the motor driven; – 3PH PMDC/AC or BLDC/AC (trapezoidal driven), or – 3PH AC induction motor, or – 3PH PMAC or BLAC (sinusoidal driven) ■ number of the poles pairs of the motor; and ■ control method. Other, more specific parameters include types of control (i.e., Ramp Up Acceleration Speed for the “3PH BLDC/AC trapezoidal” or Variable Frequency Control for the “3PH AC Induction” motor). These settings reside in the .h header file used with the design kit software library (see Compiling the Stan- dalone RDK Libraries, page 16). The .h file is automatically generated by the GUI and/or can be modified manually by the user. To generate the firmware for the ST7MC microcontroller, the .h file and the software library must be compiled using the Cosmic or Metrowerks compiler in the ST Visual Develop v3.2.0 or Soft- ec STDV7 v3.10 environments. The firmware is then downloaded into the microcontroller memory (see GENERATING THE BINARY CODE FILE (.S19) USING STVD7, page 14). Some features of the GUI are disabled a