官方说明书ST ST485ERB 数据手册.pdfVIP

ST ST485ERB handbook /file/2714312 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2714312 ST485ERB ±15 kV ESD protected, low power RS-485/RS-422 transceiver Features ■ Low quiescent current: 300 µA ■ Designed for RS-485 interface application ■ - 7 V to 12 V common mode input voltage range ■ Driver maintains high impedance in 3-state or with the power OFF ■ 70 mV typical input hysteresis ■ 30 ns propagation delay, 5 ns skew DIP-8 SO-8 ■ Operate from a single 5 V supply ■ Current limiting and thermal shutdown for The ST485ERB is designed for bi-directional data driver overload protection communications on multipoint bus transmission ■ ESD protection: line (half-duplex applications). – ± 15 kV (HBM) – ± 8 kV (IEC-1000-4-2 contact discharge) ■ Allows up to 256 transceivers on the bus Description The ST485ERB is al low power transceiver for RS-485 and RS-422 communication. Each driver output and receiver input is protected against ±15 kV electrostatic discharge (HBM) ± 8 kV (IEC- 1000-4-2 contact discharge) shocks, without latch-up. These parts contain one driver and one receiver. This transceiver draws 300 µA (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5 V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that place