官方说明书intersil EL7155 说明书.pdf

EL7155 ® Data Sheet March 9, 2006 FN7279.2 High Performance Pin Driver Features The EL7155 high performance pin driver with 3-state is • Clocking speeds up to 40MHz suited to many ATE and level-shifting applications. The 3.5A • 15ns tr/tf at 2000pF CLOAD peak drive capability makes this part an excellent choice when driving high capacitance loads. • 0.5ns rise and fall times mismatch Output pins OUT and OUT are connected to input pins V • 0.5ns TON-TOFF prop delay mismatch H L H and VL respectively, depending on the status of the IN pin. • 3.5pF typical input capacitance One of the output pins is always in tri-state, except when the OE pin is active low, in which case both outputs are in • 3.5A peak drive 3-state mode. The isolation of the output FETs from the • Low on resistance of 3.5Ω power supplies enables V and V to be set independently, H L • High capacitive drive capability enabling level-shifting to be implemented. • Operates from 4.5V up to 16.5V This pin driver has improved performance over existing pin drivers. It is specifically designed to operate at voltages