官方说明书intersil ISL22316 说明书.pdf

ISL22316 ® Single Digitally Controlled Potentiometer (XDCP™) Data Sheet February 18, 2008 FN6186.1 2 ® Low Noise, Low Power I C Bus, 128 Taps Features The ISL22316 integrates a single digitally controlled • 128 resistor taps potentiometer (DCP) and non-volatile memory on a 2 • I C serial interface monolithic CMOS integrated circuit. - Two address pins, up to four devices/bus The digitally controlled potentiometer is implemented with a • Non-volatile storage of wiper position combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the • Wiper resistance: 70Ω typical @ VCC = 3.3V 2 I C bus interface. The potentiometer has an associated • Shutdown mode volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the • Shutdown current 5µA max user. The contents of the WR controls the position of the • Power supply: 2.7V to 5.5V wiper. At power-up, the device recalls the contents of the • 50kΩ or 10kΩ total resistance DCP’s IVR to the WR.