官方说明书intersil ISL22426 数据手册.pdf

ISL22426 Dual Digitally Controlled Potentiometer (XDCP™) Data Sheet February 29, 2008 Low Noise, Low Power, SPI® Bus, 128 Taps Features The ISL22426 integrates two digitally controlled • Two potentiometers in one package potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit. • 128 resistor taps • SPI serial interface The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The • Non-volatile storage of wiper position position of the wipers are controlled by the user through the • Wiper resistance: 70Ω typical @ VCC = 3.3V SPI serial interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value • Shutdown mode Register (IVR) that can be directly written to and read by the • Shutdown current 5µA max user. The contents of the WR controls the position of the wiper. At power-up, the device recalls the contents of the • Power supply: 2.7V to 5.5V DCP’s IVR to the corresponding WR. • 50kΩ or 10kΩ total resistance The DCPs can be used as three-terminal potentiometers or • High reliability as two-terminal variable resistors in a wide variety of - Endurance: 1,000,000 data changes per bit per register applications including control, paramete