官方说明书MAXIM DS1862 数据手册.pdf

Rev 1; 12/07 XFP Laser Control and Digital Diagnostic IC General Description Features D The DS1862 is a closed-loop laser-driver control IC with ♦ Implements XFP MSA Requirements for Digital S built-in digital diagnostics designed for XFP MSA. The Diagnostics, Serial ID, and User Memory 1 8 laser control function incorporates average power con- ♦ I2C-Compatible Serial Interface 6 trol (APC) and allows extinction ratio control though a temperature indexed look-up table (LUT). The DS1862 ♦ Automatic Power Control (APC) monitors up to seven analog inputs, including tempera- ♦ Extinction Ratio Control with Look-Up Table 2 ture and monitor diode (MD) current, which are used to ♦ Seven Monitored Channels for Digital Diagnostics regulate the laser bias current and extinction ratio. (Five Basic Plus Two Auxiliary) Warning and alarm thresholds can be programmed to generate an interrupt if monitored signals exceed toler- ♦ Internal Calibration of Monitored Channels ance. Calibration is also provided internally using inde- (Temp, VCC2/3, Bias Current, Transmitted, and pendent gain and offset scaling registers for each of Received Power) the monitored analog signals. Settings such as pro- ♦ Programmable Quick-Trip Logic for Turning grammed calibration data are stored in password-pro- Off Laser for Eye Safety tected EEPROM memory. Programming is accomplished