官方说明书FAIRCHILD Applications of Non Zero Crossing Triac Drivers Featuring the MOC3011 说明书.pdf

/file/2688463 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2688463 Application Note AN-3003 Applications of Random Phase Crossing Triac Drivers Construction across the device. Once triggered into the on (conducting) state, the detector will remain there, even if no current flows The MOC30XX family of random phase (non-zero crossing) through the LED, until the terminal current drops below the triac drivers consist of an aluminum gallium arsenide infra- holding current (typically 100 µA) at which time the detector red LED, optically coupled to a silicon detector chip. These reverts to the off (non-conducting) state. The detector may be two chips are assembled in a 6 pin DIP package, providing triggered into the on state by exceeding the forward blocking 7.5KV of insulation between the LED and the AC(PEAK) voltage, by voltage ramps across the detector at rates exceed- output detector. These output detector chips are designed to ing the static dv/dt rating, or by photons from the LED. The drive triacs controlling loads on 115 and 220V AC power LED is guaranteed by the specifications to trigger the detec- lines. The detector chip is a complex device which functions tor into the on