官方说明书ANALOG DEVICES AN-1151 数据手册.pdf

AN-1151 Application Note One Technology Way •P.O. Box 9106 •Norwood, MA 02062-9106, U.S.A. •Tel: 781.329.4700 •Fax: 781.461.3113 • Using a Johanson 2450BM14E0007 Impedance-Matched, Integrated Filter Balun with the ADF7241 and ADF7242 by Mary O’Keefe INTRODUCTION EVALUATION BOARD LAYOUT This application note describes the use and performance achieved An outline of the RF board layout is shown in Figure 1. Gerber using the Johanson Technology, Inc., 2450BM14E0007 impedance- files of the board layout are available on the Analog Devices, Inc., matched (complex differential impedance value) filter balun with ADF7242 evaluation board product website. Because the imped- the ADF7241 or ADF7242 2.4 GHz RF transceivers. The filter ance seen by the balun is inherently dependent on the layout, balun from Johanson Technology effectively reduces the RF it is recommended to follow the EVAL-ADF724xDB3Z layout front-end component count and layout space. This balun is 100% as shown in the Gerber files as closely as possible for optimum RF tested by Johanson Technology. The Additional Information performance. from Johanson Technology section provides more insight about The board schematic is shown in Figure 2. Note that the C7 and how har