官方说明书ROHM BD8311NUV 数据手册.pdfVIP

Single-chip Type with Built-in FET Switching Regulators High-efficiency Step-up Switching Regulator with Built-in Power MOSFET BD8311NUV No.10027ECT03 ●Description ROHM’s High-efficiency Step-up Switching Regulator Built-in Power MOSFET BD8311NUV generates step-up output including 8 V or 10 V from 4 batteries, batteries such as Li2cell etc. or a 5 V fixed power supply line. This IC allows easy production of small and a wide range of output current, and is equipped with an external coil/capacitor downsized by high frequency operation of 1.2 MHz, built-in 2.5 A rated 80 mΩ Nch FET SW, and flexible phase compensation system on board. ●Features 1) Incorporates Nch FET capable of withstanding 2.5 A/14 V. 2) Incorporates phase compensation device between input and output of ERROR AMP. 3) Small coils and capacitors to be used by high frequency operation of 1.2 MHz 4) Input voltage 3.5 V – 11 V 5) Output current 600 mA (3.5 V – 10 V) at 10 V 800 mA (3.5 V – 8 V) at 8 V 6) Incorporates soft-start function. 7) Incorporates timer latch system short protecting function. 2 8) As small as 3 mm , SON 10-pin package VSON010V3030 ●Application General portable equipment like DSC/DVC powered by 4 dry batteries or Li2cell ●Absolute Maximum Ratings Parameter Symbol Ratings Unit Maximum applied power voltage VCC, LX 14 V Maximum input voltage SWOUT, INV 14 V Maximum input current