官方说明书MAXIM MAX3421E 数据手册.pdf

19-3953; Rev 0; 2/06 USB Peripheral/Host Controller with SPI Interface General Description Features M The MAX3421E USB peripheral/host controller contains ♦ Microprocessor-Independent USB Solution A the digital logic and analog circuitry necessary to ♦ Software Compatible with the MAX3420E USB X implement a full-speed USB peripheral or a full-/low- 3 Peripheral Controller with SPI Interface speed host compliant to USB specification rev 2.0. A built-in transceiver features ±15kV ESD protection and ♦ Complies with USB Specification Revision 2.0 4 programmable USB connect and disconnect. An inter- (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 2 1 12Mbps/1.5Mbps Host) nal serial interface engine (SIE) handles low-level USB protocol details such as error checking and bus retries. ♦ Integrated USB Transceiver E The MAX3421E operates using a register set accessed ♦ Firmware/Hardware Control of an Internal D+ by an SPI™ interface that operates up to 26MHz. Any Pullup Resistor (Peripheral Mode) and D+/D- SPI master (microprocessor, ASIC, DSP, etc.) can add Pulldown Resistors (Host Mode) USB peripheral or host functionality using the simple 3-