官方说明书ANALOG DEVICES ADVFC32 数据手册.pdfVIP

a Voltage-to-Frequency and Frequency-to-Voltage Converter ADVFC32 FEATURE PIN CONFIGURATION High Linearity (TOP VIEW) 0.01% Max at 10 kHz F 0.05% Max at 100 kHz F N-14 Package 0.2% Max at 500 kHz F Output TTL/CMOS-Compatible V/F or F/V Conversion 6 Decade Dynamic Range Voltage or Current Input Reliable Monolithic Construction MIL-STD-883-Compliant Versions Available PRODUCT DESCRIPTION The industry standard ADVFC32 is a low cost monolithic voltage-to-frequency (V/F) converter or frequency-to-voltage (F/V) converter with good linearity (0.01% max error at 10 kHz) and operating frequency up to 0.5 MHz. In the V/F configuration, positive or negative input voltages or currents can be converted to a proportional frequency using only a few external compo- nents. For F/V conversion, the same components are used with H-10A Package a simple biasing network to accommodate a wide range of input logic levels. www.BDTIC.com/ADI TTL or CMOS compatibility is achieved in the V/F operating mode using an open collector frequency output. The pull-up resistor can be connected to voltages up to 30 volts, or to 15 V or 5 V for conventional CMOS or TTL logic levels. This resis- tor should be chosen to limit current through the open collector output to 8 mA. A larger resistance can be used if driving a high impedance load. Input offset drift is only 3 ppm of full scale per