官方说明书ROHM BD2066FJ 数据手册.pdfVIP

Power Management Switch ICs for PCs and Digital Consumer Products 2ch High Side Switch ICs for USB Devices and Memory Cards BD2062FJ,BD2066FJ No.11029EBT15 ●Description High side switch for USB is a high side switch having over-current protection used in power supply line of universal serial bus (USB). Its switch unit has two channels of N-channel power MOSFET. And, over-current detection circuit, thermal shutdown circuit, under-voltage lockout and soft-start circuit are built in. ●Features 1) Dual N-MOS High Side Switch 2) Current Limit Threshold 2.4A 3) Control Input Logic Active-Low : BD2062FJ Active-High : BD2066FJ 4) Soft-Start Circuit 5) Over-Current Detection 6) Thermal Shutdown 7) Under-Voltage Lockout 8) Open-Drain Error Flag Output 9) Reverse Current Protection When Switch Off 10) Flag Output Delay Filter Built In 11) Power Supply Voltage Range 2.7V~5.5V 12) TTL Enable Input 13) 0.8ms Typical Rise Time 14) 1μA Max Standby Current ●Applications PC, PC peripheral USB hub in consumer appliances, Car accessory, and so forth ●Line Up Matrix Parameter BD2062FJ BD2066FJ Current limit threshold (A) 2.4 2.4 Control input logic Low High Number of channels 2ch 2ch Package SOP-J8 SOP-J8 1/16 2011.05 - Rev.B © 2011 ROHM Co., Ltd. All rights re