官方说明书MAXIM MAX13036 数据手册.pdfVIP

19-0808; Rev 0; 4/07 KIT EVALUATION AVAILABLE Automotive Contact Monitor and Level Shifter General Description Features M The MAX13036 automotive contact monitor and level +6V to +26V Operating Voltage Range A X shifter monitors and debounces eight remote mechanical switches and asserts an interrupt (INT ) if a switch +42V Compatibility on BAT changes state. The state of each switch is sampled Inputs Withstand Reverse Battery 1 through an SPI™ interface by reading the status register Withstands Dynamic Battery Voltage Drop While 3 and any switch can be prohibited from asserting an inter- VL is Present 0 3 rupt by writing to the command register. Four of the switch inputs are intended for ground-connected switch- es (IN0–IN3), and the other four inputs (IN4–IN7), are Ultra-Low Operating Current 17µA (typ) in 6 Scan Mode programmable in groups of two for either ground-con- nected or battery-connected switches. Two switch inputs Resistor-Adjustable Switching Hysteresis (IN0, IN1) have direct level-shifted outputs (DO0, DO1) to be used for PWM or other timin