官方说明书intersil X9111 说明书.pdfVIP

X9111 ® Single Supply/Low Power/1024-Tap/SPI Bus Data Sheet September 15, 2006 FN8159.4 Single Digitally-Controlled (XDCP™) Features Potentiometer • 1024 Resistor Taps – 10-Bit Resolution The X9111 integrates a single digitally controlled • SPI Serial Interface for Write, Read, And Transfer potentiometer (XDCP) on a monolithic CMOS integrated Operations Of The Potentiometer circuit. • Wiper Resistance, 40Ω Typical @ 5V The digital controlled potentiometer is implemented using 1023 resistive elements in a series array. Between each • Four Non-Volatile Data Registers element are tap points connected to the wiper terminal • Non-Volatile Storage of Multiple Wiper Positions through switches. The position of the wiper on the array is • Power On Recall. Loads Saved Wiper Position on controlled by the user through the SPI bus interface. The Power-Up. potentiometer has associated with it a volatile Wiper Counter Register (WCR) and four non-volatile Data Registers that • Standby Current 3µA Max can be directly written to and read by the user. The contents • VCC: 2.7V to 5.5V Operation of the WCR controls the position of the wiper on the resistor