官方说明书intersil HC5549 说明书.pdfVIP

HC5549 ® Data Sheet October 21, 2004 FN4539.3 Low Power SLIC with Battery Switch Features The HC5549 Subscriber line • Dual Battery Operation interface circuit is a 100V • Single Additional +5V Supply diellectrically isolated bipolar integrated circuit for use in • Low Standby Power Consumption (48V, 35mW) short loop ISDN, PABX and • On Hook Transmission Pairgain applications. The HC5549 has been optimized for low power as required for battery backed remote terminals or for • Tip and Ring Disconnect applications requiring emergency powering from the line such • Soft or Hard Polarity Reversal as European ISDN NT1+ designs. • Supports 12kHz or 16kHz Pulse Metering A high and low voltage battery supply may be connected to • Ring Relay Driver the HC5549 so that power dissipation can be lowered in the off hook condition in these short loop applications. The high • On Chip 2-wire AC/DC Loopback battery supply can be used in the on-hook condition to allow • 0°C to 70°C or -40°C to 85°C Ambient Temp Range interfacing to fax and answering machines that require 48V to detect end of call status. The HC5549 also has a l