官方说明书LINEAR Application Note 129 数据手册.pdfVIP

Application Note 129 September 2010 Improving the Output Accuracy Over Temperature for RMS Power Detectors Andy Mo INTRODUCTION LTC5583 Temperature Compensation Design Stable temperature performance is extremely important LTC5583 includes two additional pins, RP1 that controls in base-station designs because the ambient tempera- the polarity of TC1, and RP2 which controls the polarity ture can vary widely depending on the surroundings of TC2. However, the magnitude of the temperature coef- and the location. Using high accuracy over temperature ficients are the same with a fixed RT1 , or RT2 value, only RMS detectors can improve the power efficiency of the polarity is flipped. Both channel A and channel B share base-station designs. The LTC5582 and the dual-channel the compensation circuitry, therefore both channels are LTC5583 are a family of RMS detectors that offer excellent controlled together. stable temperature performance (from –40°C to 85°C) at Figure 1 illustrates the change in VOUT as a function of any frequency up to 10GHz for LTC5582, and 6GHz for temperature from the 1st order temperature compensa- LTC5583. However, their temperature coefficients vary tion. Only three resistor values are shown to illustrate with frequency, and without temperature compensation, that increasing resistor values causes an increase in the