SunST6X40RVM技术介绍200811.ppt

RVM简介 Storage Group Sun Microsystems,Inc 概述 ST6540磁盘阵列介绍 ST6140磁盘阵列介绍 CSM II磁盘模块介绍 CAM软件介绍 数据保护 A replication set has the following characteristics: ● A volume can only belong to one mirrored pair at any given time. Meaning a single primary volume cannot have two secondary volumes. ● A mirror pair (or the mirror relationship) is on a volume per volume basis, not on a file basis. ● Only standard volumes may be included in a Replication Set Remote Replication Overview Sun Confidential: Internal Only 11-268 Sun StorageTek? 6540 Data Service Remote Replication Copyright 2006 Sun Microsystems, Inc. All Rights Reserved. Sun Services, Revision A ● A maximum of 32 Replication Sets are permitted on each storage system A replication set has the following characteristics: ● The primary volume is the volume that accepts host I/O ● When the Replication Set is first created, the controller that owns the primary volume copies all of the data from the primary volume to the secondary volume. This is a full synchronization. ● Both volumes in a mirror pair must be owned by the same controller in each storage system. Volume ownership is determined by the owner of the primary volume. An ownership change on the primary volume will automatically cause a subsequent ownership change on the associated secondary volume on the next I/O. AVT and failover controller ownership change requests to the secondary volume will be rejected. RVM工作流程 distances supported by RVM The mirroring distances supported between storage systems participating in a mirror relationship are governed by the distance limits of the Fibre Channel standard. The distances that have been tested using a FC Fabric in conjunction with CNT routers: ● Synchronous - 100 miles (160 km) ● Asychronous - 3200 miles (5150 km) ● Asychronous with Write Consistency - 800 miles (1285 km) To configure the remote replication environment ● Direct-attach the management host to the array using any of ports 1 through 3. Port 4 is dedicated t