标准ECE-R101-A1.pdfVIP

E/ECE/324 E/ECE/TRANS/505 } Rev.2/Add.100/Rev.2/Amend.1 8 August 2007 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS ∗/ (Revision 2, including the amendments that entered into force on 16 October 1995) _________ Addendum 100: Regulation No. 101 Revision 2 - Amendment 1 Supplement 7 to the original version of the Regulation - Date of entry into force: 18 June 2007 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PASSENGER CARS POWERED BY AN INTERNAL COMBUSTION ENGINE ONLY, OR POWERED BY A HYBRID ELECTRIC POWER TRAIN WITH REGARD TO THE MEASUREMENT OF THE EMISSION OF CARBON DIOXIDE AND FUEL CONSUMPTION AND/OR THE MEASUREMENT OF ELECTRIC ENERGY CONSUMPTION AND ELECTRIC RANGE, AND OF CATEGORIES M AND N VEHICLES POWERED BY AN ELECTRIC POWER TRAIN 1 1 ONLY WITH REGARD TO THE MEASUREMENT OF ELECTRIC ENERGY CONSUMPTION AND ELECTRIC RANGE _________ UNITED NATIONS ∗/ Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.07- E/ECE/324 E/ECE/TRANS/505 } Rev.2/Add.100/Rev.2/Amend.1 Regulation No. 101 page 2 Paragraph 1., amend to read (footnote 1/ not amended): 1. SCOPE