通用对TS的要求.docVIP

PAGE 11 April, 1999 General Motors ISO TS/16949 Customer-Specific Requirements 1. Scope ISO/TS 16949 and this document define General Motors’ fundamental quality system requirements for suppliers (see Definitions 3.9), as an alternative to Quality System Requirements (QS-9000). The requirements in this document shall be included in any scope of registration/certification to ISO/TS 16949 issued by a GM-recognized certification body in order for the ISO/TS 16949 certificate to satisfy General Motors’ supplier requirement for QS-9000 third party registration/certification. (See ISO/TS 16949 Remarks for certification). Service parts and materials applicability does not include aftermarket (See Definitions 3.2) parts or suppliers. All ISO/TS 16949 requirements and the requirements of this document shall be documented in the supplier’s quality system. Copies of this document are available from General Motors. 2. References 2.1 Chrysler, Ford, General Motors Quality System Requirements (QS-9000), Third Edition, March, 1998. 2.2 Chrysler, Ford General Motors Production Part Approval Process (PPAP), Second Edition, February, 1995. 2.3 Chrysler, Ford, General Motors Statistical Process Control (SPC) reference manual, First Edition, 1992. 2.4 ISO/IEC Guide 62:1996 2.5 International Accreditation Forum Application of ISO/IEC Guide 62, Issue 1, dated 2 June 1997 2.6 Automotive certification scheme for ISO/TS 16949, Rules for Achieving IATF Recognition Copies of QS-9000, PPAP, SPC and other related manuals are available from AIAG at 01-248-358-3003, and Carwin Continuous at 44-1708-861333. Copies of ISO documents are available from the American National Standards Institute (ANSI) at (212) 642-4980. Additional references are listed as requirements in section 4.  3. Definitions Where inconsistent terminology exists between ISO/TS 16949 and this document, this document shall take precedence. Otherwise the definitions from ISO/TS 16949 apply to this document. 3.1 Act