石灰石－吸收塔结构设计培训资料.pptVIP

12. M?rz 1999 (Dateiname) Austrian Energy Environment AG AE ENERGIETECHNIK GMBH 12. M?rz 1999 Technical Cooperation and License AgreementChonquing Yuanda Item A 6.11Design manual part 1Materials of Construction Josef-Peter K?ck Item A6.11 – Materials of construction Flue gas system (ducts) From Boiler T ~ 55 °C T ~ 80 - 125 °C T ~ 125 °C T ~ 100 °C T ~80 °C SO2 ~ 250 – 3,500 mg/Nm3 SO2 ~ 250 mg/Nm3 SO2 ~ 3,500 mg/Nm3 SO2 ~ 250 mg/Nm3 SO2 ~ 3,500 mg/Nm3 Acid dew point Item A6.11 – Materials of construction Absorber – Material concept Zone A: Absorber sump, absorber scrubbing area exposed at high abrasion (30 % solids) and critical chemical conditions Zone B: Sump area, mist eliminator area, gas outlet area - standard conditions Zone C: Absorber gas inlet area exposed at high temperature (~100 °C) and critical chemical conditions (untreated flue gas, acid dew point, dry/wet area) Item A6.11 – Materials of construction Rubberlined Absorber Item A6.11 - Materials of construction Rubber lining systems Rubber lined single-layer with 4 mm thickness or double-layer each 4 mm thickness Rubber lined single-layer with 6 mm thickness Advantages single-layer with 6 mm thickness compared with double-layer each 4 mm thickness: Possible sources of errors for the adhesion between the rubber lined double-layer are not available Rubber lined single-layer construction is cheaper and helps to save time Item A6.11 - Materials of construction Rubber lining for absorber sump and absorber wall A - Double rubber lining- Thickness - approx. 8 mm B - Rubber lining- Thickness - approx. 4 mm Item A6.11 - Materials of construction Flake lining for absorber and ducts C - Flake-filled vinyl ester lining - Nominal - thickness – 1.2 - 1.5 mm 0.4 - 0.5 mm 0.4 - 0.5 mm 0.4 - 0.5 mm 50 μm Item A6.11 - Materials of construction Life time of corrosion protection systems 120,000 (expected) 6mm 1-layer 100,000 (expected) 8 mm 2-layer until 80