复用Multiplexing.pptVIP

Chapter 8Multiplexing ZHONG Yingji Ph.D, Associate Professor (仲英济 博士，副教授) TEL:+86-531EMAIL:zhongyingji32@sdu.edu.cn Multiplexing Frequency Division Multiplexing FDM Useful bandwidth of medium exceeds required bandwidth of channel Each signal is modulated to a different carrier frequency Carrier frequencies separated so signals do not overlap (guard bands) e.g. broadcast radio Channel allocated even if no data Frequency Division MultiplexingDiagram FDM System FDM of Three Voiceband Signals Analog Carrier Systems ATT (USA) Hierarchy of FDM schemes Group 12 voice channels (4kHz each) = 48kHz Range 60kHz to 108kHz Supergroup 60 channel FDM of 5 group signals on carriers between 420kHz and 612 kHz Mastergroup 10 supergroups Wavelength Division Multiplexing Multiple beams of light at different frequency Carried by optical fiber A form of FDM Each color of light (wavelength) carries separate data channel 1997 Bell Labs 100 beams Each at 10 Gbps Giving 1 terabit per second (Tbps) Commercial systems of 160 channels of 10 Gbps now available Lab systems (Alcatel) 256 channels at 39.8 Gbps each 10.1 Tbps Over 100km WDM Operation Same general architecture as other FDM Number of sources generating laser beams at different frequencies Multiplexer consolidates sources for transmission over single fiber Optical amplifiers amplify all wavelengths Typically tens of km apart Demux separates channels at the destination Mostly 1550nm wavelength range Was 200MHz per channel Now 50GHz Dense Wavelength Division Multiplexing DWDM No official or standard definition Implies more channels more closely spaced that WDM 200GHz or less Synchronous Time Division Multiplexing Data rate of medium exceeds data rate of digital signal to be transmitted Multiple digital signals interleaved in time May be at bit level of blocks Time slots preassigned to sources and fixed Time slots allocated even if no data Time slots do not have to be evenly distributed amongst sources Time Division Mult