毕业设计论文-小型数控立式铣床机械结构设计.doc

福州大学至诚学院 本科生毕业设计（论文） 题 目： 小型数控立式铣床机械结构设计 姓 名： 学 号： 系 别： 机械工程系 专 业： 机械设计制造及其自动化 年 级： 2008级 指导教师： 年 月 日 独创性声明 本毕业设计（论文）是我个人在导师指导下完成的。文中引用他人研究成果的部分已在标注中说明；其他同志对本设计（论文）的启发和贡献均已在谢辞中体现；其它内容及成果为本人独立完成。特此声明。 论文作者签名： 日期： 关于论文使用授权的说明 本人完全了解福州大学至诚学院有关保留、使用学位论文的规定，即：学院有权保留送交论文的印刷本、复印件和电子版本，允许论文被查阅和借阅；学院可以公布论文的全部或部分内容，可以采用影印、缩印、数字化或其他复制手段保存论文。保密的论文在解密后应遵守此规定。 论文作者签名： 指导教师签名： 日期：小型数控立式铣床机械结构设计 摘要 本文主要介绍了 关键字：Small vertical milling machine mechanical structure design of numerical control abstract This paper mainly introduces the numerical control vertical milling machine mechanical structure parts of the design.Include vertical milling machine of the overall layout, main transmission system, servo drive system and the main mechanical structure design, etc.This design is the traditional machine tools, on the basis of the reform, which can adapt to the more processing need. This should make the general structure of the milling machine is more compact, so the main transmission system with all of the vertical shaft.And at the same time it also ensures that the transmission of smooth and accurate, this needs in the design of the mechanical structure has higher request, to choose and the shaft of the motor design and calculation of the need to be more precise.And servo drive system design is the main consideration of transmission of precise, screw transmission of the sensitivity of the servo motor and the optimal transmission.To screw need to consider the transmission torque and torque size, how to choose to do the optimal design. The machine optimal transmission.The design of the CNC table before because of the contact less, in turn a large number of data, choose dividing rotating ta