氢站JPR减压阀资料.pdfVIP

High Pressure Regulators The Jordan Valve J Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for corrosive and specialty gases and liquids. Typical applications include gas liquid chromatography, and flame ionization detectors, as well as other industrial controls. The J Series are available in a variety of alloy materials and in the following configurations: — JPR – Versatile low flow pressure regulator — JHR – Larger capacity pressure regulator with Cv of 0.6 (0,05 Kv) — JHP – High pressure version with setpoints to 1500 psi (103 bar) — JBP – High pressure back pressure regulator — JCYL – One stage cylinder pressure regulator — JCYL-2 – Two stage cylinder pressure regulator Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelephone: 800-543-7311 (U. S. A. Canada) E-Mail: info@ • URL: JPR/JHR Low Flow Pressure Regulator The Jordan JPR and JHR pressure reducing regulators are designed for gas or liquid service and with inlet pressures up to 3600 psi (248 bar). Standard adjuststable outlet ranges are from 1 - 10 psig (0,07 - 0,69 Barg) thru 10 - 750 psig (0,69 - 51,7 Barg). The JPR/JHR Series can be manufactured from various barstock materials, and is ideally suited for either cor- rosive or non-corrosive services. The JPR/JHR Series is ideally suited for the following applications: corrosive gases, sampling systems, chemical/petrochemical