基于STC12C5A60S2与VS1003音频播放器的研究.docVIP

江阴职业技术学院 毕业论文 课题：基于STC12C5A60S2与VS1003音频播放器的研究 专 业 应用电子技术 学生姓名 倪松鹏 班 级 10应用电子1班 学 号 指导教师 何谐 完成日期 2012年12月1日3种：自身集成有解码模块的MCU专用芯片、DSP软件解码和主控MCU上一个专用的解码芯片。基于成本、音质和功耗的综合考虑，采用一种基于SPI协议的解码芯片VS1003来实现音频解码功能，处理器选用STC12C5A60S2作为控制MCU，存储介质选用SD卡来实现音频播放功能。本设计的音频播放过程是STC12C5A60S2通过SPI接口将音频数据从SD卡中读出，然后再通过SPI接口传送至VS1003进行解码播放，在此VS1003解码模块单独使用一个SPI接口，以减少干扰和噪音，提高音质。在此研究基于STC12C5A60S2处理器的SPI接口，以实现VS1003的驱动。以STC12C5A60S2作为核心控制器，结合VS1003音频解码器，设计了一种带SD储存卡的MP3播放器，在软件设计上，使用FAT32文件系统对文件进行管理，可以使播放歌曲在MP3播放器与个人计算机之间共享。 Abstrat With the rapid development of consumer electronic products, audio player on various occasions in the growing demand, subsequently and the audio player design is also increasing, which mainly design has 3 kinds: the integrated decoding module in control MCU chip, DSP software decoder and a main control MCU the last dedicated decoding chip.Based on the cost, quality and the power consumption of the integrated consideration, a method based on the SPI protocol decoding chip VS1003 to realize audio decoding function, the processor selects STC12C5A60S2 as control MCU, storage medium using SD card audio playing function.The design of audio playback process is STC12C5A60S2 through SPI interface audio data read out from the SD card, and then through the SPI interface to send to VS1003 for decoding and playing, this VS1003 decoding module separately using a SPI interface, so as to reduce the interference and noise, improve the quality.In this study based on the STC12C5A60S2 processor SPI interface, to achieve the VS1003 driver.With STC12C5A60S2 as the core controller, combined with the design of VS1003 audio decoder, a memory card with SD MP3 player, in the design of software, using the FAT32 file system for file management, can make songs in MP3 player and personal computers to share. 目 录 摘 要 I Abstrat I 第一章 绪论 1 1.1 MP3背景 1 1.2 应用现状 1 1.3 研究内容 2 1.4 原理概述 2 第二章 VS1003音频解码模块 4 2.1 VS1003简介 4 2.2 VS1003硬件设计 5 2.2.1 VS1003管脚功能 5 2.2.2 内部寄存器 6 2.2.3