CPSC油漆和其他类似表面涂层中总铅测定的标准操作程序.pdfVIP

UNITED STATES 美国 CONSUMER PRODUCT SAFETY COMMISSION 消费品安全委员会 DIRECTORATE FOR LABORATORY SCIENCES 实验室科学理事会 DIVISION OF CHEMISTRY 化学部 10901 DARNESTOWN RD DARNESTOWN 路10901 号 GAITHERSBURG, MD 20878 马里兰GAITHERSBURG 城20878 Test Method: CPSC-CH-E1003-09 测试方法：CPSC-CH-E1003-09 Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings★ 油漆和其他类似表面涂层中总铅测定的标准操作程序 April 26, 2009 2009 年4 月26 日 This document provides detailed information on test methods that will be used by the U.S. Consumer Product Safety Commission’s (CPSC) testing laboratory (LSC) for the analysis of paint and certain painted products. The method is used to determine the total lead content of paint, or a painted surface, on a dry paint basis. This method supersedes all previously published standard operating procedures for lead in paint testing. Existing accreditations remain valid. The rules for accreditation for lead in paint testing for compliance to the Ban of Lead-Containing Paint and Certain Consumer Products Bearing Lead Containing Paint, Code of Federal Regulations, Title 16, Part 1303 (16 C.F.R §1303) remain unchanged, and do not explicitly require the use of this or any earlier standard operating procedure (/nara/cfr/waisidx_08/16cfr1303_08.html). 这篇文章详细描述了美国消费品安全委员会（CPSC ）测试室（LSC ）测定油漆和某些被涂 油漆的产品方法。本方法用于测定在干基状态下的油漆或表面涂层中总铅含量。现有的授权 仍然有效。这铅含量测定标准授权依据含铅油漆法令和某些消费品含铅指令，联邦法令编号 为16 第1303 部分（16 C.F.R §1303）仍没改变，用这个或任何容易的标准操作程序没有明 确的要求。 * This document