RL5160GNG奶罐车改装设计（机械CAD图纸）.docVIP

摘 要 随着我国经济的发展，人民生活水平的进一步提高，牛奶的消费总量在快速的增长，同时奶制品、食用油、饮料等行业对产品运输的要求越来越大，大型奶罐车的需求量日益增加。奶罐车在制造以及投入运营运输液态食品时，常遇到以下问题：保温效果较差，剩余率较高，对液态食品的清洗效果不够理想。基于对奶罐车发展趋势的理解和对其存在问题的认识，本文介绍了一款性能更优良的奶罐车的设计方案。 在查阅大量相关资料的基础上，对二类底盘进行选型，在以罐体总成为主要设计主体进行设计，在整个设计过程中将参考其他液态食品罐汽车罐体截面的基本形状，选择简单、工艺性好、容积率最高的圆形截面。为了保证牛奶的口味，需要低温运输，参照隔热保温车的隔热保温原理，设计有隔热保温层。隔热保温结构是将罐体设计成双层罐，并在两层罐体之间填充隔热材料，防止外界的温度对关内液体温度的影响。由于牛奶是一种能使细菌迅速繁殖的理想营养基质，牛奶等液体食品在使用之后，如果不及时﹑彻底地进行清洗，将会是细菌大量繁殖，从而影响产品的卫生质量，所以要对清洗装置进行设计。最后进行整车动力性、燃油经济性进行了计算。 整车设计完成后，对奶罐车使用要求进行分析，经过对局部的修改，得到一个可以利用的设计方案。 关键词：罐式汽车；奶罐车；罐体；隔热层；排液系统 ABSTRACT As Chinas economic development, to further improve peoples living standards, consumption of milk in the rapid growth, while dairy products, edible oil, beverage and other industries for product transportation requirements increasing, the demand for large-scale milk tanker increasing. Milk tanker and put into operation in the manufacture of liquid food transport, often encounter the following problems: insulation less effective, and the remaining higher rate, the cleaning effect of the liquid food is not ideal. Trends for milk tanker based understanding and awareness of its problems, this paper describes a performance of better milk tanker design.  After reviewing a lot of relevant information based on the selection of second-class chassis, the total tank in order to become a major design of the main design, the entire design process will make reference to other liquid food can cross-section of the basic shape of the tank car, choose a simple , technology is good, the highest rate of circular cross-section volume. In order to ensure the taste of milk, cold chain needs, with reference to the car thermal insulation thermal insulation principle, the design of thermal insulation layer. Thermal insulation structure is designed to double the tank tanks, and filling in between two layers of insulation material tank to prevent the outside temperature on the temperature of the liquid off. Because milk is a way for bacteria m