SAU局数据配置ISSUE.pptVIP

WF001203 SAU 局数据配置 1.0 引入 介绍完SAU的硬件数据配置后，本课程介绍SAU局数据配置 局数据配置包含本局信息、信令数据、MEM信息配置几部分。 学习目标 掌握SAU的本局数据配置 掌握SAU的信令数据配置 理解信令数据配置各表的表间关系 课程内容 第一章 基本概念 第一章 基本概念 窄带信令的硬件配置 SAU 窄带信令的硬件配置 窄带信令的硬件配置 窄带信令的硬件配置 课程内容 课程内容 MTP信令数据配置 第三章 MTP信令数据配置 第三章 MTP信令数据配置 第三章 MTP信令数据配置 第三章 MTP信令数据配置 课程内容 SCCP 数据配置 ADD SCCP DPC ADD SCCP SSN ADD SCCP GT 第四章 SCCP 数据配置 第四章 SCCP 数据配置 第四章 SCCP 数据配置 信令数据表间关系 (回顾) 课程内容 USAU数据配置-典型配置 Summary Ok, let’s configure the MTP DSP table. In this table, we should fill in the point codes for BSC, STP1, STP2, GMSC, MSC/VLR2, HLR2 and HLR1. BSC, GMSC, STP1,and STP2, HLR1 have the direct signaling links with the local office respectively; MSC/VLR has the direct speech channel with MSC/VLR2; HLR2 is defined in SCCP layer. So we should configure them. Then, the several field in this table. The first field is DSP index, it is index number of the corresponding destination signaling point when invoked internally. It should be numbered uniformly within the office. Here we number them from 0 to 6, corresponding to the BSC, STP1, STP2, GMSC, HLR1, HLR2 and MSC/VLR2. OPC: local office point code, when add one record in the table, there is de default configuration, which is indexed from the Intra-office information table. We suggest you fill in it when you add records. Ok, let’s configure the MTP DSP table. In this table, we should fill in the point codes for BSC, STP1, STP2, GMSC, MSC/VLR2, HLR2 and HLR1. BSC, GMSC, STP1,and STP2, HLR1 have the direct signaling links with the local office respectively; MSC/VLR has the direct speech channel with MSC/VLR2; HLR2 is defined in SCCP layer. So we should configure them. Then, the several field in this table. The first field is DSP index, it is index number of the corresponding destination signaling point when invoked internally. It should be numbered uniformly within the office. Here we number them from 0 to 6, corresponding to the BSC, STP1, STP2, GMSC, HLR1, HLR2 and MSC/VLR2. OPC: local office point code, when add on