NSN切换参数整改.pdfVIP

切换参数整改、实施与效果 1. 切换参数概述 在路测中常发现小区间发生乒乓切换。经过检查都是因为切换参数设置不统一 而造成的。相关的参数如下： 参数 参数功能 相关指令 LDR The parameters compare the averaged values of signal ZEHO,ZEHS strength downlink measurements for triggering the handover process. LUR The parameters compare the averaged values of signal ZEHO,ZEHS strength uplink measurements for triggering the handover process. ACL With this parameter you define the adjacent cell layer in ZEAO,ZEAM relation to the active cell. A call can be handed over to the cells that are visible to the serving cell by adjacency definition. This means the cells of upper layer, serving layer and lower layer. The adjacent cell layer definition can be used, for example, in umbrella and power budget handovers in defining the target cells according to their layer. AUCL With this parameter you define the minimum signal level ZEAO,ZEAM of an adjacent cell, when a handover is allowed to an adjacent umbrella cell. PMRG With this parameter you define a threshold in the power ZEAO,ZEAM budget process. The handover margin prevents repeated handover between adjacent cells. 最常见的乒乓切换例子如左图所 示： C (900) A-B:ACL=LOWER, AUCL=-70 （反向关功率 Rxlev=-63dBm 预算切换） B-C:ACL=SAME,PMRG=6 A (900)