空洞Void.docVIP

空洞Void 何谓空洞（外观）Void is a phenomenon that hole is generated in mold piece. 是指成型品内部产生空洞的一种现象。 图1. 手柄型试样的厚壁处出现的空洞Figure.1 Void in handle type test piece (X-Ray photo.) 上面的图片是软X射线拍摄的透射图片。在软X光图片表明成型品内部存在空穴，呈白色。在OK品（合格品）中，仅在轴的插入部分（浇口附近）呈现白色。而在NG品（废品）中，除此以外还有2处呈现白色，表明产生了空洞。Above pictures are taken by soft x-ray photograph. Void is white area in the photograph. Voidless product has only bearing hole. Otherwise, Void product has another two hole as shown white area.空洞的原因大致分为两种：一种是大量气体的混入，另一种则是厚壁处的的树脂收缩。前者称为“气体空洞”，后者称为“真空空洞”，以示区别。The causes of void are classified into two. One is by mixing of a consid