PTN—TSS5C培训3.pptVIP

Why the 1850 TSS-5C? 1850TSS-5C merges the developments of 1850TSS-3 and 1850TSS-5 in order to: Rationalize the CPE portfolio Improve costs compared to the 1850TSS-5 What’s meaning of “C” in TSS-5C 1850 TSS-5C: Release 1 customer interface cards GigE SFPs: 1000BASE-T, SX, LX, ZX, BX10/20/40, EZX, CWDM short/long haul, DWDM TSS-5C R1.0 Features Ethernet features: general Ethernet features: QoS Ethernet features: OAM Protection T-MPLS/MPLS-TP features Circuit Emulation Services (CES) Synchronization features: SyncE Synchronization features: 1588v2 Management features Ethernet Features: General QoS General 32,000 MAC table MEF services: E-line, E-LAN, E-Tree MEF 9, 14, 18, 25 certification Jumbo frames: 9600 bytes VLAN tagging Port Mirroring: ingress/egress L2 control protocol filtering/tunneling L2 Access Control Lists (ACL) Rate limiting Anti-DOS (Denial of Service) attacks Ethernet Features: OAM and Protection Features IEEE 802.3ah link OAM IEEE 802.1ag CFM: connectivity check, loopback, link trace (CC, LB, LT) Ethernet 802.1ag CC, LB, LT in T-MPLS mode (interworking with TSS-320 R3.2) ITU-T Y.1731 (RDI, AIS, LM, 2-way and 1-way DM, fast CCM, APS, CSF, pro-active synthetic LM) Performance Monitoring: port counters, flow counters, RMON counters IEEE 802.1AX Link Aggregation Group (LAG, LACP) on UNI T-MPLS/MPLS-TP Features 1024 bidirectional tunnels 1024 bidirectional pseudowires E-Line (VPWS), E-LAN (VPLS) service 8 QoS classes QoS: MPLS PHB DiffServ QoS, E-LSP, CAC check Tunnel (CV, FDI, RDI, APS, LB, DM, LM); T-MPLS/MPLS-TP OAM profile management per tunnel MPLS-TP OAM support with GAL/GACH at tunnel level G.8131 1:1 linear tunnel protection (bi-directional, revertive, dual-homing) SD trigger for G.8131 Performance Management: Tunnel and PW counting MPLS label push/pop/swap operations, LER or LSR Circuit Emulation Services PWE3 (Related RFCs: 4553, 4446, 4197, 3985, 3916) E1/DS1 pseudowires: SAToP Channelized STM-1 interface (UNI only) TDM CES timing modes: TD