SIM30产品说明.pptVIP

SIMCOM MODULE FEATURES Agenda Roadmap Roadmap SIM300 1:Tri-band(900/1800/1900) GPRS Class 10 2: 40x33x2.85mm 60-pin ENTERY board to board connector 3: Sleep mode(about 2.5mA) 4: Embeded TCP/IP with transparent mode 5: Autobauding 6: Over-temperature automatic shutdown 7: SIM card detection function 8: All software version based on V10.0 Defferrents between SIM300 and SIM100S 1.Power on mode 2.Buzzer pin 3.Add SIM_PRESENCE pin 4.Audio circuit 5.The level of Vext SIM300 Hardware Features Turn on SIM300 using the PWRKEY pin SIM300 Hardware Features The PIN36 of SIM300 is the BUZZER, but the PIN36 of SIM100S is the RESET . The PIN32 of SIM300 is GPIO5, but the PIN32 of SIM100S is the BUZZER. The SIM300 don’t provide the reset pin. SIM300 Hardware Features The SIM_PRESENCE pin (PIN16) is used for detecting the SIM card removal. SIM300 Hardware Features If you don’t use the SIM card detection function, you can let the SIM_PRESENCE pin NC or connect to GND. SIM300 Hardware Features When customer use SIM300 audio function, don’t need use MIC bias. It may reduce the customer’s BOM.The speaker’s circuit is same as SIM100S. SIM300 Hardware Features The Vext level of SIM300 is the 3.0V/60mA. The Vext level of SIM100S is the 2.8V/10mA. The customer may use Vext to dirve the other IC, for example LCD and serial port IC. Other modules features SIM340 Features The SIM340 is same as SIM300 except working frequence. SIM300 is Tri-band module ,SIM340 is Quad-band module SIM300A3/A4 Features SIM300A3 is Tri-band module: GSM900,DCS1800,PCS1900. SIM300A4 is Quad-band module: GSM850,GSM900,DCS1800,PCS1900 Their every pin function is same as SIM200,the type of connector is MOLEX-52974-0608. SIM300C Features Tri-band or Quad-band(SIM340C) GSM/GPRS module The module size is 50x33x6.2mm DIP type board to board connector suite for vehicle application SIM300D Features SIM300D is the complete Tri-band /Quad-band (SIM340D) GSM/GPRS solution