数字信号处理算法研毕业论文.docxVIP

毕业论文论文题目（中文）数字信号处理算法研究--基于人体脉搏信号论文题目（外文）Research on Digital Signal Processing Algorithm-- based on human pulse signal数字信号处理算法研究--基于人体脉搏信号中文摘要脉搏信号是一种较为常见的生物医学信号,是人体重要的动力学信号之一,脉搏信号在相当程度上可以反映人体心血管的生理状态信息,它能反映人体心脏器官以及血液循环系统的生理情况变更,在临床健康观察和疾病诊断中位置非常的重要。因此脉搏信号的处理和分析在医学界受到了广泛的关注和重视。随着电子技术与计算机技术的快速发展,将人体脉搏信号转化为电信号进行处理与分析,实现智能化的脉搏检测与分析技术,已是生物医学工程范畴的发展目标。具体研究工作为：通过采用一款pulsesensor基于光电反射式模拟传感器用于测量脉搏、心率来检测人体模拟脉搏信号。再通过Arduino等单片机将模拟脉搏信号转换为数字信号通过USB上传到电脑上。最后通过matlab对其进行滤波处理消除噪声干扰，得到正确脉搏信号。处理后发现了脉搏信号可以反映人体的生理特性。关键词：人体脉搏信号 数字信号处理 滤波器Research on Digital Signal Processing Algorithm-- based on human pulse signalAbstractPulse signal is a common biomedical signal, is one of the important dynamic signals of the human body, the pulse signal to a certain extent, reflects the human cardiovascular physiological status information, it can reflect the human heart organs and blood circulation system physiological changes, It is very important in clinical health observation and disease diagnosis. Pulse signal processing and analysis in the medical world has been widely concerned and attention. With the development of electronic technology and computer technology, the human pulse signal into electrical signals for detection and analysis, to achieve intelligent pulse detection and analysis technology, biomedical engineering is the direction of development.Specific research work:to detect the pulse signal of human body by measuring the pulse and heart rate by using a pulsesensor based analog sensor.and then through the Arduino microcontroller analog pulse signal into digital signal through the USB upload to the computer.Finally, through matlab to filter it to eliminate noise interference, get the correct pulse signal.(4) after treatment found that the pulse signal can reflect the physiological characteristics of the human body.Keywords: human pulse signal, digital signal processing, filter目录中文摘要3Abstract4第一章本文研究目的6第二章 滤波器的设计72.1噪声类型72.1.1基线漂移、人体呼吸等低频干扰，频率小于1Hz；82.1.2工频干扰，是固定频率的干扰，频率为50Hz（可选）；82.1.3其