抢答器 eda设计.docVIP

抢答器 LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; USE IEEE.STD_LOGIC_UNSIGNED.ALL; ENTITY qdq IS PORT(CLK,A0,B0,C0,START0,COMFIRM0,CLEAR0:IN STD_LOGIC;--CLK(250Hz)/按键信号输入 ANSWER,OT:OUT STD_LOGIC;--正在答题/答题超时 LED:OUT STD_LOGIC_VECTOR(3 DOWNTO 0);--开始抢答/A/B/C WHOS:OUT STD_LOGIC_VECTOR(3 DOWNTO 0); CNT30O:OUT STD_LOGIC_VECTOR(7 DOWNTO 0); SMG:OUT STD_LOGIC_VECTOR(6 DOWNTO 0);--接A~G SEL:OUT STD_LOGIC_VECTOR(1 DOWNTO 0)); END ENTITY; ARCHITECTURE one OF qdq IS COMPONENT smgxsq --七段译码 PORT(DIN:IN STD_LOGIC_VECTOR(3 DOWNTO 0); DOUT:OUT STD_LOGIC_VECTOR(6 DOWNTO 0)); END COMPONENT; COMPON