优秀文摘.docxVIP

焦作市山阳区综合办公楼设计土木工程11级2班 倪老子 指导教师：李艳摘 要：本工程为焦作市山阳区框架结构综合办公楼。本建筑物主体结构采用框架结构，抗震等级二级，设防烈度7度，设计地震分组为一组。本设计主要进行了结构方案中横向框架第8轴抗震设计。在确定框架布局之后，先进行了层间荷载代表值的计算,接着利用顶点位移法求出自震周期，进而按底部剪力法计算水平地震荷载作用下大小，进而求出在水平荷载作用下的结构内力（弯矩、剪力、轴力）。接着计算竖向荷载（恒载及活荷载）作用下的结构内力。是找出最不利的一组或几组内力组合。选取最安全的结果计算配筋并绘图。完成了平台板，梯段板，平台梁等构件的内力和配筋计算及施工图绘制。对楼板进行了配筋计算。整个结构在设计过程中，严格遵循相关的专业规范的要求，参考相关资料和有关最新的国家标准规范，对设计的各个环节进行综合全面的科学性考虑。关键词：框架结构，抗震设计，荷载，内力计算，截面设计Abstract：This engineering is a building of Railway middle school intending to set up inJiaozuo City. This building resistant fires is second class, and the anti-seismic garrison is seven degree. Designed mainly for programme 8th axis horizontal frame in earthquake-resistant design of structures.After you determine the frame layout, make a representative value of load calculation, then from the earthquake cycle using vertex displacement method, and then press the bottom under shearing force calculation of horizontal earthquake load size and find the structures internal force under horizontal load (bending moment, shear force and axial force).Calculation of vertical load (dead load and live load) under the action of internal forces.Is to identify the most unfavourable combinations of one or a few groups internal forces.Reinforcement and drawing of the select the most secure results.Complete platform, bench, platform and reinforcement calculation of internal force of girder members andconstructiondrawing.To reinforcement calculation of the floor.Structure in the design process as a whole, strict compliance with the requirements of relevant professional norms, refer to the relevant information and the latest standard specification, the design of scientific considered all aspects of a comprehensive.Key words:Frame Structure、SeismicDesign、 Load、Force Calculation、 Section Design概述工程名称：焦作市山阳区综合办公楼；工程总面积：7161.88m2，总高27.6m,一层层高3.9m，二层以上层高3.6m，室内外高差0.45m；7层框架结构。该拟建的建筑位于焦作市市内，设计内容：本工程为框架结构行政办公楼，一层层高3.9米，二层以上层高3.6米，室内外高差0.45米。防火等级为一级，安全疏散距离满足房门至外部出口或封闭楼梯间最大距离小于35m，大房间设前后两个门