毕业设计计算书(范本)-中德金属生态城市政工程—珠江大道K3+000～K7+173.780标段施工图设计.docVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 广东工业大学 华立学院 本科毕业设计（论文） 中德金属生态城市政工程—珠江大道 K3+000～K7+173.780标段施工图设计 论文题目 学 部 城建学部 专 业 土木工程 班 级 10土木工程 5班 学 号 xx 学生姓名 xxxxxx 指导教师 设 计 总 说 明 广东省揭阳市揭东区玉窖镇珠江大道是在地方及国家经济快速发展的背景下设计修建的，镇区内有多条水泥混凝土路面村道，经过多年运营，已经不能满足玉窖镇现有经济发展对道路的需求。珠江大道作用在于完善国家基础设施建设，满足日益增长的交通需求。珠江大道新建工程路线全长4173.78m，全线采用城市道路A级主干道道路标准，设计计算行车速度40 km/h。全线路基采用挖方坡度1:1，填方坡度1:1.5标准城市道路断面坡度。 本设计是在工程可行性研究的基础上进行的，完成了新建城市沥青道路路线、路基、路面、排水、附属设施等的设计。结合施工图设计的整个过程，着重进行了路线方案的比选、道路平曲线设计、道路竖曲线设计、路面结构的设计和排水管线的设计以及交通标志的设置。 关键词：路线，路基，路面排水，沥青混凝土路面 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 4 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 5 General description of design Sino-German Avenue of the jiedong District yujiao Town of Guangdong province was completed on the condition of national and local economic quickly developing, after many years of operations a number of the cement concrete pavement Village Road has been unable to meet yujiao town development traffic needs in the town. The Sino-German Avenue of the jiedong District yujiao Town was 4173.78m long. The overall route followed the urban road Class A firstly trunk road standards of grade separation. The design speed was 40 km/h. The full range of sub-grade excavation slope of 1:1, the fill slope 1:1.5 standard urban road section slope. This design was based on feasibility study and included the route, roadbed, pavement, drainage, and the facilities design. At the same time it was also based on the entire designing process, especially the routes selection, road horizontal curve design, road vertical curve design, pavement design, drainage design and settings of the traffic signs. Keywords: route, subgrade, pavement, drainage, asphalt concrete pavement 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 1 概述 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.1工程概况 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.2道路设计说明书 1