山脚树煤矿1.5Mta新井初步设计（近距离煤层群保护层开采的瓦斯治理）.docVIP

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为山脚树煤矿1.50 Mt/a新井设计。山脚树煤矿位于贵州省六盘水市境内，红果至水城铁路干线和盘(县)水(城)公路从矿区通过，通便利。井田走向长度约5.30 km，倾向长度约3.50 km，面积约18.27。主采煤层为12煤层，平均倾角为10.5°，平均厚度为3.17 m。井田工业储量为357.41 Mt，可采储量为266.36Mt，矿井服务年限为136.59 a。矿井正常涌水量为160 m3/h，最大涌水量为600m3/h。矿井相对瓦斯涌出量为50.73m3/t，属于高瓦斯矿井。 根据井田地质条件，提出四个技术上可行的开拓方案。方案一：双立井两水平开拓，暗斜井延伸；方案二：双斜井两水平开拓暗斜井延伸；方案三：双斜井两水平开拓暗立井延伸；方案四：双斜井三水平开拓。通过技术经济比较，最终确定方案二为最优方案。设计首采区采用采区准备方式，工作面长度210 m，采用一次采全高采煤法，沿空掘巷，矿井年工作日为300 d，工作制度为“三八制”。 大巷采用胶带输送机运煤，辅助运输采用矿车运输。矿井通风方式为中央边界式。 专题部分题目：煤与瓦斯共采技术现状综述，煤与瓦斯共采技术实现工作面Y型通风，根本上解决了上隅角瓦斯积聚难题，利于实现高浓度瓦斯抽采，有效解决了工作面的瓦斯超限问题，成倍提高我国高瓦斯难抽放煤层工作面的单产水平。是绿色采矿的发展方向，在技术上和经济上具有很大的优越性。 翻译部分题目：Analytical models for rock bolts. 关键词：山脚树煤矿；斜井；采区布置；一次采全高采煤法；两翼对角式。  ABSTRACT This design can be divided into three sections: general design, monographic study and translation of an academic paper. The general design is about a 1.50 Mt/a new underground mine design of Shanjiaoshu coal mine. Shanjiaoshu coal mine lies in Pan City, Guizhou province.As Hongguo railway runs in the west of the mine field and Shuicheng railway runs in the east of the mine field, the traffic is convenient.It’s about 5.30 km on the strike and 3.50 km on the dip, with the 18.72 km2 total horizontal area.The minable coal seam is 12 with an average thickness of 3.17 m and an average dip of 10.5°.The proved reserves of this coal mine are 357.41 Mt and the minable reserves are 266.36 Mt, with a mine life of 136.59 a. The normal mine inflow is 160 m3/h and the maximum mine inflow is 600 m3/h. The mine gas emission rate is 50.73 m3/t,which belongs to high gas mine. Mine geological conditions under the proposed development schemes for the four technically feasible. Option One: Two parallel inclined central ventilation; Option II: Two-shaft ventilation shaft ventilation Shihmen; Option Three: Two wings of the angle of ventilation shaft; program four: two wings of the angle of ventilation shaft. Through technical and economic comparison of a finalized plan for the optima