计算机HP刀片服务器cClass介绍.ppt

Speaker notes for Steve Smith: We lower the cost of IT operations by improving asset utilization and the headcount to asset ratio. For example, today typically the ratio is 1 technician to 20 servers. With the Infrastructure for the Adaptive Enterprise,?this ratio will be?1 technician to 200 servers. We: Assure that services are up and running Optimize the infrastructure for service level objectives Provide proactive security We have the volume and the portfolio to meet any need, construct any system, and anticipate any problem. Infrastructure for the Adaptive Enterprise addresses each of our customer pain points -- and, more importantly, addresses them better than anyone else in the industry. AC Redundant In N + N AC Redundant power mode, a minimum of two power supplies is required. N power supplies provide power and N provide redundancy, where N can equal 1, 2, or 3. The Onboard Administrator reserves sufficient power so that any number of power supplies from 1 to N can fail, and the enclosure will continue to operate at full performance on the remaining line feed. When correctly wired with redundant AC line feeds, the AC Redundant mode ensures that an AC line feed failure will not cause the enclosure to power off. The AC Redundant mode provides full redundancy and is the configuration requested by large enterprise customers because it ensures full performance with one power line feed. Total power is amount from A or B side with the lesser number of supplies. A 3 + 3 configuration = 6750W. Power Envelope Up to 6 PS @ 2250W ea. 13500W capacity per enclosure Choice of single-phase or 3-phase enclosures Choice of N+N AC redundancy, or N+1 PS redundancy Power Management If needed, customers can constrain the maximum BTU’s per enclosure and rack. Cooling Improved cooling efficiency Reduced power consumption Easy Setup Cable-less server installation Enclosure manager wizard setup Multiple enclosure setup functions Optional redundant management module PARSEC archi