减速器箱盖加工工艺及夹-毕业设计.doc

PAGE 1 - PAGE 1 - 长春理工大学本科毕业设计 摘 要 在生产加工过程中，通过一定的手段使生产对象（原材料，毛坯，零件或总成等）的质和量的状态发生直接变化的过程叫工艺过程，如毛坯制造，机械加工，热处理，装配等都称之为工艺过程。在制定工艺过程中，要确定各工序的安装工位和该工序需要的工步，加工该工序的机车及机床的进给量，切削深度，主轴转速和切削速度，该工序的夹具，刀具及量具，还有走刀次数和走刀长度，工件的定位方案的采用，最后计算该工序的基本时间，辅助时间和工作地服务时间。对应工序的夹具设计，夹具设计所采取的定位方案，方案的可行性分析，以及各个零部件的装配图和多视图。 关键词：工序 工艺分析 定位方案 夹具设计 Abstract In the production process, Through some means to make production object (raw materials, semifinished product, parts or assembly, etc.) state of the quality and quantity of the process is called direct change happened process, such as blank manufacturing process, mechanical processing, heat treatment, assembling and are called the process technology. In making process, make sure the process of installation location and the process need work step, processing this process of locomotive and machine tools, cutting depth, the feed spindle speed and cutting speed, this process of fixture, tools and measuring tools, and go walking knife number and length of the process, Also the positioning scheme adopted. Finally calculated the basic time, Auxiliary time and locate service time. Corresponding process of fixture design, fixture design scheme to the feasibility of the scheme, the position of each component analysis, and the assembly and multiple views. Keywords: Process; Process analysis; Positioning scheme; Fixture design; 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 摘 要 PAGEREF _Toc \h I HYPERLINK \l _Toc Abstract PAGEREF _Toc \h II HYPERLINK \l _Toc 目 录 PAGEREF _Toc \h III HYPERLINK \l _Toc 第1章 绪论 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 第2章 减速器箱盖的分析 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 2.1 减速器箱盖的工艺分析 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 2.2确定毛坯的制造形式 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 2.3箱体零件的结构工艺性 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 第3章 工艺规程设计 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 3.1 加工工艺过程 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 3.2确定各表面加工方案 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 3.2.1影响加工方法的因素 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 3.3确