基于DCDC转换移动电源的研究和设计.docVIP

PAGE PAGE 22 基于DC-DC转换移动电源的研究与设计 摘要：目前人们生活水平的不断提高，随身携带式的电子产品也越来越多为了解决续航问题需要一种移动电源。因此本文设计了一款基于DC-DC升压型移动开关电源的电路，该电路采用聚合物电池电源管理方案实现，能满足5V移动设备的续航要求。电路中主要由单片机SN8P2711来控制锂电池充电模块的工作与休眠，实现锂电池电量的显示以及电源输出的开关，同时也控制DC-DC升压电路的工作与否。该设计主要是实现聚合物电池的充电以及放电。设计的主要理念是实现电能的高效率转换。该移动开关电源具有输出电压纹波小，转换效率高，最高转换效率达到89%，具有良好的性能和负载调整能力。 关键词：DC-DC转换；开关电源； SN8P2711；移动电源； Research and design of DC-DC conversiton mobile power Abstract: At present peoples living standards continue to improve, carry portable electronic products is also increasing，so a mobile power is needed to solve the endurance problem. This paper designs a circuit based on DC-DC boost mobile switching power, using polymer battery power management program ,it can power 5V mobile devices. In this circuit charging, display of the lithium battery and power output are mainly controlled by the microcontroller SN8P2711 lithium, meanwhile it control the work of DC-DC boost circuit. The design of the main polymer battery energy storage and discharge. The main design philosophy is to achieve high-efficiency conversion of electrical energy. The mobile switching power supply output voltage ripple, high conversion efficiency, the highest conversion efficiency of 89%, with good performance and load regulation capability. Keywords: DC-DC converter; switching power supply; SN8P2711; mobile power; 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc 1 概述 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.1 DC-DC移动电源简介 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.2 DC-DC移动电源的发展与趋势 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 1.3 本文研究的意义 PAGEREF _Toc \h 3 HYPERLINK \l _Toc 2 移动电源基础 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 2.1 移动电源的定义 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 2.2 移动电源的适用范围 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 2.3 移动电源的技术 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 2.4 移动电源工作原理 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 2.5 电源电芯 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 2.6 升压系统 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 2.7 充电管理系统 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 2.