立式钻床研究毕业论文.pdf

红河学院本科毕业论文（设计） 摘 要 近年来，随着数控机床、组合机床、加工中心、车削中心和加工单元等高 科技机床产品的出现。使得机械加工中的钻孔、扩孔、铰孔、攻丝等工序变得 越来越便捷、高效。对此，传统钻穿在机械加工中所处的地位及发展趋势越来 越受到了人们的关注与质疑。其实，从机械制造业的发展来看，继续发展立式 钻床，不仅是很有的，也是很有前途的。因为孔加工是机械加工中非常广泛的 工序，几乎贯穿整个机械加工 本次设计以能加工简单孔的ZJ4113立式钻床为例，在Solidworks软件基 础之上详细介绍立式钻床的设计及典型零部件三维建模的方法。全文共分为5 章。第1章绪论简单地介绍立式钻床的背景及目前国内外的研究现状；第2章 详细地介绍立式钻床的机械结构与原理及Solidworks软件简介；第3章介绍立 式钻床典型零部件的建模方法；第4章介绍立式钻床典型零部件的装配方法； 第5章介绍装配动画、爆炸动画及运动模拟动画的制作。旨在通过虚拟技术， 清晰地展现立式台钻的机械结构与工作原理 关键词：ZJ4113立式台钻；Solidworks；建模；虚拟技术；动画 红河学院本科毕业论文（设计） 红河学院本科毕业论文（设计） ABSTRACT Inrecentyears,with CNCmachine, combinationmachinetools andmachining center, turning center, and the emergence of high-tech machine products such as processing unit. Makes the mechanical process of drilling, reaming, reaming and tapping process is becoming more and more convenient and efficient. This. Traditional drill wear in the machining status and development trend of more and more received peoples concern and question. In fact, from the point of the development of mechanical manufacturing, continue to develop vertical drilling machine, not only is some, also is very promising. Because the hole machining is very extensiveinmechanicalprocessing process, almostthroughoutthemechanical processing. This design to processing simple hole ZJ4113 vertical drilling machine for example,Based on Solidworks software in detail the design of the vertical drilling machine andtypicalparts of3dmodelingmethod.Thefulltextisdividedintofive chapters. Chapter 1 introduction briefly introduces the background of the vertical drillingmachineandtheresearchstatusathomeandabroad;Chapter2introducesin detail the mechanical structure and principle of vertical drilling machine and the introduction of Solidworks software; Chapter 3 introducesvertical drillingmachine parts of typical modeling method; Chapter 4