数控车床的管理跟维修1【论文】.docVIP

PAGE PAGE 1 摘 要 数控车床是机电一体化紧密结合的典范，是一个庞大的系统，涉及机、电、液、气、 HYPERLINK /dianzijixie/ 电子、光等各项技术，在运行使用中不可避免地要产生各种故障，关键的问题是如何迅速诊断，确定故障部位，并及时排除解决，保证正常使用，提高生产效率数控车床的维修以及故障排除包括：CNC系统的维护，CNC装置的外观检查，故障的处置《直观法、自诊断功能法、功能程序测试法、交换法、转移法、参数检查法、测量比较法、敲击法》数控故障产生的原因以及检测的方法，电气故障性质、表象（现象可归纳为超压、欠压、频率和相位漂移、谐波失真、共模噪声及常模噪声）、原因或后果，正确操作和使用数控系统的步骤，.电气维修与故障的排除，故障的调查与分析等等。 关键词：数控维护 驱动装置 主传动系统 进给系统 Abstract Number control tool machine is a machine and give or get an electric shock integral whole and turn an allied model, is a huge system, involve machine, give or get an electric shock, liquid, spirit, electronics, only etc. is each technique, inevitably want and produce in the middle of circulating use various break down, key of problem is how quickly diagnose, make sure to break down part, and expel solution in time, promise normal use, raise a production efficiency number and control maintaining of tool machine and break down expel and include:The maintenance of CNC system, CNC equips of external appearance check, break down of the treatment 《keep a view method, from diagnosis function method, function procedure test method, exchange a method, transfer the method, parameter check method, measure to compare a method and pound a method 》 number control to break down the reason of the creation and the method of the examination, electricity breakdown the property, idea(the phenomenon can induce for super press, owe to press, frequency and mutually the drift, Xie wave lose really, total mold Zao voice and often mold Zao voice) and reason or result, correct operation and use number control the step of system, .The electricity maintains with break down of exclusion, break down of survey and analysis etc.. Keyword:Number control maintenance to drive to equip a lord to spread system to enter to the system 1 数控设备的管理 1.1数控设备的管理模式 　　数控设备的使用情况直接影响着 HYPERLINK /company/ 企业的生产效率和 HYPERLINK /Economic/ 经济效益，而管理方式又直接决定着数控设备的使用，可见数控设备的管理是十分重要的。在数控设备使用初期，由于数控设备少，类型单一，并且集中在一、两个单位，?因此，各有关单位自身形成数控设备管理、使用、维修三位一体的封闭形