本科论文（设计）杭州地铁1号线滨河路-滨江站区间隧道设计与施工.docVIP

摘 要 本毕业设计主要包括三个部分，第一部分是滨和路～滨江区间隧道结构设计；第二部分是滨和路～滨江区间隧道施工组织设计；第三部分是专题部分，不同浆液扩散规律及机理综述。 在第一部分区间隧道结构设计中，根据隧道穿越地层的工程地质、水文地质条件和周边环境情况，通过施工方案的比选，确定采用盾构法施工，隧道衬砌结构采用复合衬砌，并对其进行相应的强度和抗浮验算。 第二部分是区间隧道施工组织设计，根据隧道施工方法和隧道周边的环境情况，对施工前准备工作，施工场地布置，隧道开挖与衬砌结构施工等进行设计，并编制了工程进度计划，编写了相应的质量、安全、环境保护等措施。 第三部分是专题部分，内容是不同浆液扩散规律及机理。结合相关的参考资料，综述不同浆液扩散规律及机理。 关键词：隧道； 复合衬砌； 施工组织； 浆液扩散规律 ABSTRACT This graduation design mainly includes three part，the first part is the structure design of the Binhe Road to Binjiang subway tunnel in Hangzhou； The second part is the design of the Binhe Road to Binjiang subway tunnel construction organization，The third part is special subject part which is subway tunnel level freezing construction technique studied. In the first part，according to the engineering geology，the hydrology geology conditions and environment circumstances of the tunnel located，through comparing the Construction schemes，confirm that the tunnel was constructed in accordance with the shallow-buried excavation method and compound linings as support structure. Its carry on strengths check computation and floating resistance computation. The second part is the tunnel construction organization design，according to the excavation pattern and the environment circumstance of the tunnel round，designing the construction preparative，the construction place arrange，tunnel face advance sequences and tunnel linings construction. Estimating the work project，weaving to write the homologous quantity、safety、civilization management measure. The third part is the special subject part. Its contents are subway tunnel level freezing construction technique parameter studied. According to some examples and related reference，summarize some common rule of the tunnel level freezing construction technique parameter. Keyword： tunnel； compound linings； construction organizing； shallow-buried excavation method； spread regularity of grout 目 录 第一部分 杭州地铁1号线滨和路～滨江站区间隧道结构设计 TOC \o 1-2 \h \u HYPERLINK \l _Toc26033 1 工程概况 PAGEREF _T