芯片资料-AT24C02SC.pdfVIP

Features • Low-voltage and Standard-voltage Operation, VCC = 2.7V–5.5V • Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K), 1024 x 8 (8K), or 2048 x 8 (16K) • Two-wire Serial Interface • Schmitt Trigger, Filtered Inputs for Noise Suppression • Bidirectional Data Transfer Protocol • 400 kHz Compatibility • 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes • Partial Page Writes Allowed • Self-timed Write Cycle (5 ms max) Two-wire Serial • High Reliability – Endurance: One Million Write Cycles EEPROM Smart – Data Retention: 100 Years – ESD Protection: 3000V Card Modules Description 1K (128 x 8) The AT24C01A/02SC/04SC/08SC/16SC provide 1024/2048/4096/8192/16384 bits of 2K (256 x 8) serial, electrically-erasable, and programmable read-only memory (EEPROM) orga- nized as 128/256/512/1024/2048 words of 8 bits each. The devices are optimized for 4K (512 x 8) use in smart card applications where low-power and low-voltage operation may be essential. The devices are available in several standard ISO 7816 smart card modules 8K (1024 x 8) (see Ordering Information, pages 12–13). All devices are functionally equivalent to Atmel serial EEPROM products offered in sta ndard IC packages (PDIP, SOIC, TSSOP, 16K (2048 x 8) MAP), with the exception of the slave address and write protect functions, which are not required for smart card applications. Table 1. Pin Configuration AT24C01ASC Pad Name Description ISO Module Contact AT24